Opinion, Sorting and separating equipment

Sensor technology reshapes e-waste recovery

E-waste

For Total Green Recycling CEO Ram Kalyanasundaram, modern e-waste recycling is about more than processing greater volumes. It is about recovering cleaner, higher-value materials consistently and returning them to the circular economy.

That objective has brought the Western Australian recycler and STEINERT Australia together over several years, with the latter’s sensor-based sorting technology helping Total Green improve the recovery and purity of materials from a variable waste stream.

Kalyanasundaram’s company processes end-of-life electrical and electronic equipment including televisions, computers, monitors, printers and other electrical equipment. Its current throughput is around 22 to 25 tonnes per operating day, or approximately 5000 tonnes a year. He said the company’s target outputs include ferrous and non-ferrous metals, printed circuit boards, copper-rich and aluminium-rich fractions, as well as recoverable plastics.

“The aim is not only to recover these materials, but to produce clean, consistent fractions that downstream processors can use effectively,” he said.

The challenge is that e-waste is anything but uniform. Every load can contain a different combination of products, metals, plastics and contaminants, while changing product designs and material compositions make consistent sorting increasingly important.

For Total Green Recycling, product purity and repeatability are critical. The company is also dealing with greater focus on batteries, data security, downstream transparency and verified environmental standards, while commodity buyers expect cleaner and more consistent products.

Kalyanasundaram said good material preparation, stable operating settings and disciplined quality checks provide the foundation. This is where STEINERT comes into play.

“STEINERT systems then give us the detection and separation capability to recover targeted materials more precisely,” he said. “This reduces contamination, limits the loss of valuable material and helps us produce more consistent outputs for our downstream customers.”

From manual sorting to sensor technology

When STEINERT first began working with Total Green Recycling, the recycler’s process relied on manual sorting and a less sophisticated sorting system. Johann Hefner, sales manager, resource recovery at STEINERT Australia, said the companies had worked together over several years, initially with the KSS combination sorter before the UniSort was introduced to specifically target circuit boards.

“When we started talking, they had a shredder, a magnet and eddy current separator, and they had an older colour sorter,” Hefner said.

The colour sorter could be used repeatedly to recover green circuit boards, but the resulting fraction was heavily contaminated. The KSS provided broader sorting capability, combining colour, induction and laser sensors and allowing Total Green to target materials including circuit boards, metals, wire and stainless steel.

As discussions progressed, circuit boards emerged as a key material stream, leading to the introduction of the UniSort. Its near-infrared technology identifies materials based on their resin characteristics rather than simply their visible colour, allowing it to recognise circuit boards regardless of their appearance.

“It doesn’t matter if it’s a brown or red or blue or green circuit board. It sees it all,” Hefner said.

That capability addresses one of the difficulties created when e-waste is shredded. Circuit boards can become dispersed throughout the processing line, with some entering the magnetic fraction because of small connectors, others moving into the non-ferrous fraction through an eddy current, and others falling through the eddy current and becoming distributed across the plant.

STEINERT’s approach is to position the UniSort after the shredder and screen and before the first magnet, allowing circuit boards to be removed from the material stream before they become dispersed. The result has been an improvement in both recovery and product quality.

“Total Green Recycling can generate a circuit board fraction that’s high purity, and they recover probably more than 90 per cent of the circuit board,” Hefner said.

Recovering more from every tonne

The KSS machine’s features are key to the success of processing e-waste.

“The KSS is an induction sorter, which gives users the flexibility of removing all the metals from the material that the eddy current doesn’t pick up, which includes the stainless steel, the wires and so on, to generate a metal-free plastic fraction for further processing,” Hefner said.

Material can be re-fed through the system to create separate fractions, including wire and stainless steel. This gives Total Green a robust approach to metal recovery while reducing the need for manual picking.

Kalyanasundaram said automation had become important as the company grew and the volume and variety of material moving through its plant increased.

“STEINERT technology has helped us automate critical separation steps, improve recovery and build a platform that can support further growth,” he said.

These systems also provide the ability to adjust sorting recipes as the feedstock changes, supporting a process where no two loads are necessarily the same. For Kalyanasundaram, that flexibility is important not simply because it increases recovery, but because it creates a pathway towards greater consistency and scalability.

“What impressed me most was the amount of valuable material that can still be identified and recovered from what initially appears to be a mixed, low-value stream,” he said.

Continuing to refine recovery

The UniSort can also be used for visible plastics, with the technology capable of identifying materials such as ABS, PP, PC and others. However, the machine installed at Total Green is heavily utilised, while near-infrared sorting cannot identify dark or black plastics. Steinert has the BlackEye sensor sorter that is able to sort black plastics which could become relevant in a future project.

The focus now is on optimising the existing line, improving recovery, refining sorting recipes and using operating data to improve quality and throughput. Total Green also intends to continue developing markets for recovered plastics and higher-value metal fractions.

For STEINERT, the project highlights how sensor technology can be adapted to the challenges of e-waste processing, while local support remains an important part of the relationship.

“We have a facility in Perth as well. We have two service technicians there and a test centre,” Hefner said.

Kalyanasundaram said the technology was only one part of the equation.

“Technology is important, but results come from combining good technology with skilled people and strong operating discipline,” he said. “That combination of people, processes and equipment will remain central to Total Green’s efforts to recover more value from every tonne processed.”

For Hefner, the outcome demonstrates what can be achieved when more precise sorting is applied to a difficult and constantly changing material stream.

“In my opinion, they now have the most advanced recycling e-waste recycling plant in Australia,” he said.

 

Send this to a friend