SILVAN 4,000L SUPAFLO G2 SPRAYER WITH POWERHEAD FAN - MIN 80HP

Next generation trailed air assist 4,000 litre G2 sprayer with 161 L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft, flush tank, chemical induction hopper and Powerhead conveyor with 920mm fan.

Ideal for orchards with trees up to 5 metres high.

Specifications:

Market: Horticulture
Tank Size (L): 4000
Connection Type: Trailed
Min PTO hp: 80
Pump Size (L/min): 161
Height / Width / Length (mm): 2020 / 1880 / 5550
Product Weight (kg): 1400
Application: Orchards.

Features:

Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast aluminium body with brass heads and manifolds. IDS1701:161L/min. capacity, 5000kPa pressure.

Fan size: 920mm or 1000mm axial flow type,10 bladed fan with curved nylon reinforced blades, centrifugal clutch for soft engagement/ disengagement and protective mesh cover.

Nozzles: 24 flip-over nozzle bodies for dilute/concentrate spraying with on/off. 12 Ceramic hollow cone nozzles per side and 12 ceramic jets with stainless steel swirl plates per side. (16 per side with the Radak conveyor).

Gearbox: 2-speed with neutral position, oil-bath type

Control: 40 Bar electric section valves with master valve, electric pressure regulator and in cab controls.

Main Tank: Polytuff impact resistant polyethylene construction with calibrated sight line. 50mm Camlock top & bottom fill.

Flush Tank: 330L polytuff tank with top fill. Used to flush pump, filter, spray lines and nozzles.

Hand Wash Tank: 60L polytuff tank filled through cap. Tap located next to chemical mixer hopper.

Main Tank: Chemical mixer hopper with tap controls for rinse, transfer and main tank rinse. Venturi transfer back to main tank.

Frame: Galvanised steel with jockey wheel & adjustable drawbar.

Agitation: Pump bypass plus venturi agitator.

Pressure gauge: Glycerine filled gauge located on valve bank.

Filtration: Suction line filter, pressure filter, nozzle cup strainers.

Wheel Equipment: Glideflex axle with 13.0/65 - 18" implement tyres (speed rating 30km/h).

PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.

HP Required: Minimum 80 PTO HP (920mm fan), minimum 90 PTO HP (1000mm fan).

Options:

- Hydraulic kit for Radak Conveyor (top wings)
- SCRAM Jet (to suit Radak conveyor)
- AVO Jet (to suit Radak conveyor)
- Leaf guard (to suit Powerhead & Radak)
- Double spray lines (Powerhead - includes upgrade to 1000mm fan)
- Double spray lines (Radak)
- Bravo 180S automatic rate controller
- Tandem suspension axle with 11.5/80 - 15.3 tyres
- Flotation tyres - 558-400/60 - 22.5 (in lieu of standard)
- IDS2001 pump, 182L/min. capacity, 5000kPa pressure
- IDS2600 pump, 249L/min. capacity, 5000kPa pressure



All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.