SHAW BEND 2450MM X 2.5MM

Shaw Bend Combination 2450mmx2mm Hydraulic Panbrake
Removable Top and Bottom Beds ideal for TDF and TDC flanges for the Air conditioning and Duct Forming industry
Australian Patent Fingers
Australian Design

Full - Hydraulic Clamp, Hydraulic Lift

SPECIFICATIONS
Length up to 2450mm/ 8ft
Capacity up to 2mm mild steel / 14g mild steel
High bending angle of 0-130 degrees
Greatest depth of box bent 180 mm
Amount of lift of clamping beam 200mm
Motor 4kw
3 Phase 415Volt
Pump 21 MPa

STRUCTURAL & OPERATING FEATURES

SEGMENTED and removable fingers on top clamping beam

EXCLUSIVE Segmented and removable fingers on BOTTOM BENDING apron for turn down 50mm for splash backs or Air Conditioning turn down

Manually operated clamping operation for efficient heavy duty operation of machine

HYDRAULIC OPERATION of bending beam with adjustable preset of Bend angle

High structural rigidity from heavy plate steel box construction with continuous welded seams

Special provision for re-setting and aligning the machine throughout itâs lifetime

Spherical bearings for smooth ease of operation of the clamping mechanism

Replaceable bronze bushes at all points of wear

Grease nipples at all wear points

Variable combination width of bending fingers (hardened and ground) both clamping and folding

Cam adjustment for different Gauges