INTERMERCATO GRAPPLES GS1418 ROTATING GRAPPLE SAW 13 - 18 TONNE- FREE SHIPPING

✨ New: Multi-Enquiry Feature

Submit your email enquiry, then send it to similar listings with just a click!

Phone

Contact Seller

Phone: 08 6555 0960
✨ New: Multi-Enquiry Feature

Submit your email enquiry, then send it to similar listings with just a click!

Email Advertiser:

For security reasons, do not select "Remember my details" if you are using a shared computer.
View our privacy policy, collection notice and terms and conditions to understand how we use your personal information.

Dealer

Intermercato Grapples

200 Beringarra Avenue

Malaga, WA

Intermercato Grapples Visit website

Features

Title INTERMERCATO GRAPPLES GS1418 ROTATING GRAPPLE SAW 13 - 18 TONNE- FREE SHIPPING
Make INTERMERCATO GRAPPLES
Sale Price $64,900
Listing Type New
Stock Number S18
RefCode TA1219886

Description

Maximum diameter cut 700mm.

Normal setup below for two auxiliary machine. If you have three sets of auxiliaries it is much easier and a better setup to.

High flow: Circuit we usually put the saw on which require 100 160 LPM.

Low flow: The grab and rotator go on one line and we switch between the two with an electronic solenoid. We run a 4mm cable from the solenoid up to the couplers you can connect to this and run it into the cab to a momentary switch so the saw only works while the button is being pushed down. The rotator requires 60lpm to operate. The grab also requires 60lpm so it works well.

1 set Saw requires 100-160 LPM
2 set Grapple requires 60LPM
3 Set rotator requires 60LPM

One of the more important things is to make sure the saw has a ¾ 1 return to tank line with no restrictions via valve bocks etc.

Any questions give me a call.


Head bracket 15T (80kg) two removable 65mm pins, low profile for tilting hitch or angled.

Rotator Worm Drive WD17/2 suits up to 19 tonne excavators, 2 motor, high torque through gearing. Locally motor, installed pressure and flow control.

Rotary Union 4 port 2 x ½ lines, 2 x ¾ lines, made in Sweden. Allows 360 degrees endless rotation with saw.

HEAVY DUTY FIVE FINGER Grab GX28-50/5 (495kg) Stone/Universal Series - solid 50mm hardox fingers, recommended on excavators up to 18 tonnes in harder conditions, STRONG. Alu-bronze bushes with graphite pockets and all pivot points greaseable. Opens 1486mm, closing diameter 130mm. Made in Europe.

Saw Interlam 800MT (125kg plus bracket) maximum diameter cut 700mm. 820mm overall, 2.0mm chain, .404 pitch, Oil flow 100 litres to max 160 litres. Max pressure 250 bar, Auto lubrication, Rapid mechanical chain tensioner, Spring retract, Direct drive, Parker F11-19 motor (19cc). Must have return directly back to tank.

Check Valve

Solenoid mounted on head bracket, share lines between grab and rotator


Details on hydraulic fit up.

The most important is the return back to tank on the saw, this cant go via a block and is best as a minimum ¾ or 1 line.
You can possibly share the saw and grab via a solenoid. Priority to grab and when activated to

We also recommend looking at lexon marguard or similar for the windscreen for operator protection in case of chain shot breaking of the chain occurs. This applies particularly to the the ¾ saws as they are running F12-30 motors which have a lot of torque, even though the chain is extremely strong.