HAFCO METALMASTER HM-54GV
Finance Estimate
From $41.74*
per week
From 9.95% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.95% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.95% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Finance Estimate
From $41.74*
per week
From 9.95% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.95% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.95% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Contact Seller
Features
| Title | HAFCO METALMASTER HM-54GV |
| Type | Engineering - Fabrication |
| Sub Type | Milling Machines |
| Make | HAFCO METALMASTER |
| Model | HM-54GV |
| Sale Price | $8,190 GST Exclusive |
| Listing Type | New |
| Stock Number | 345480 |
| RefCode | TA1275928 |
Description
HM-54GV Workshop Turret Milling Machine Inverter Variable Speed, Geared Head - Horizontal & Vertical
HAFCO-METALMASTER HM-54GV Workshop Turret Milling Machine Inverter Variable Speed, Geared Head - Horizontal & Vertical Table Travel: (X) - 600mm (Y) - 200mm (Z) - 340mm Includes Digital Readout System & Swivel Table
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: M579
This HM-54GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 2.2kW / 3hp vertical motor and a 2hp motor for the horizontal spindle, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The hi-low geared head selector lever mounted on right side of milling head allows for quick change off speed range.
Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage LED work light, coolant system, X axis power feed unit, drill chuck, 1`` & 1-1/4`` horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.
Extra Features:
Swivel table
1`` & 1-1/4`` horizontal arbors
Features:
Electronic inverter variable spindle speeds
3 Axis digital readout system
Swivel table left & right with graduated scale
Mill head tilts to ??45?? left to right
450mm horizontally sliding and rotating ram
NT30 Horizontal and vertical spindles that are hardened and ground
Precision-ground dovetail slide-ways and table
Precision milling table incorporating machined T slots
Rear concertina slide-way cover
Forward and reverse button switch
Fine hand wheel operated quill feed
Swarf & splash tray
Spindle lock for quill
Metric dial graduations @ 0.02mm for X Y & Z-Axis
Vertical quill hand-wheel dial graduations @ 0.05mm
All slides utilise dovetail construction for maximum rigidity
Includes 1`` & 1-1/4`` arbors for the horizontal spindle
Includes:
- Electronic inverter variable spindle speeds
- 3 Axis digital readout system
- X-Axis power-feed
- Safety cutter guard
- Swarf tray
- Coolant system
- LED work light
- Drill chuck & arbor
- NT30 to 3MT adaptor
- 2MT & 3MT adaptors
- M12 x 1.75mm Drawbar
Specifications:
ORDER CODE: M579
MODEL: HM-54GV
Digital Readout: 3-Axis Digital Readout
Type: Vertical & Horizontal
Table Size (mm): 1000 x 240
Column Type: ~
Spindle Taper - Vertical: NT30
Spindle Taper - Horizontal: NT30
Longitudinal Travel (X-Axis) (mm): 600*
Cross Travel (Y-Axis) (mm): 200*
Vertical Travel (Z-Axis) (mm): 340
Type of Slides: Dovetail
Ram Travel (mm): 450
Spindle to Table (mm): 375
Spindle to Base: ~
Spindle Travel / Diameter (mm): 120 / 90
Throat Depth (max.) (mm): 640
Tilting Head (Left ~ Right): ??45??
Tilting Head (Forward ~ Back): Fixed
Drilling Capacity (mm): 40
End Milling Capacity (mm): 25
Face Milling Capacity (mm): 80
Power Feed - Quill (mm/rev): Manual
Power Feed - Longitudinal (X-Axis) (mm/min): 20 - 2000
Power Feed - Cross (Y-Axis) (mm/min): Optional *
Power Feed - Vertical (Z-Axis) (mm/min): Optional *
Table T-Slot Size (inch / mm): 14
Work Table Load Capacity (kg): 160
Spindle Speeds Vertical (No./ rpm): Variable (100 - 2000)
Spindle Speeds Horizontal (No./ rpm): 9 (60 - 1350)
Spindle Speeds - Universal Head: ~
Motor Power - Vertical Spindle (kW / hp): 2.2 / 3
Motor Power - Horizontal Spindle (kW / hp): 1.5 / 2
Motor Power - Universal Head: ~
Voltage / Amperage (V / amp): 240 / 10
Nett Weight (kg): 900
To Purchase Online Please Visit The Machineryhouse Website & Search For 'M579'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
HAFCO-METALMASTER HM-54GV Workshop Turret Milling Machine Inverter Variable Speed, Geared Head - Horizontal & Vertical Table Travel: (X) - 600mm (Y) - 200mm (Z) - 340mm Includes Digital Readout System & Swivel Table
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: M579
This HM-54GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 2.2kW / 3hp vertical motor and a 2hp motor for the horizontal spindle, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The hi-low geared head selector lever mounted on right side of milling head allows for quick change off speed range.
Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage LED work light, coolant system, X axis power feed unit, drill chuck, 1`` & 1-1/4`` horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.
Extra Features:
Swivel table
1`` & 1-1/4`` horizontal arbors
Features:
Electronic inverter variable spindle speeds
3 Axis digital readout system
Swivel table left & right with graduated scale
Mill head tilts to ??45?? left to right
450mm horizontally sliding and rotating ram
NT30 Horizontal and vertical spindles that are hardened and ground
Precision-ground dovetail slide-ways and table
Precision milling table incorporating machined T slots
Rear concertina slide-way cover
Forward and reverse button switch
Fine hand wheel operated quill feed
Swarf & splash tray
Spindle lock for quill
Metric dial graduations @ 0.02mm for X Y & Z-Axis
Vertical quill hand-wheel dial graduations @ 0.05mm
All slides utilise dovetail construction for maximum rigidity
Includes 1`` & 1-1/4`` arbors for the horizontal spindle
- Note: X travel maybe reduced due to digital readout scales and safety stops
Includes:
- Electronic inverter variable spindle speeds
- 3 Axis digital readout system
- X-Axis power-feed
- Safety cutter guard
- Swarf tray
- Coolant system
- LED work light
- Drill chuck & arbor
- NT30 to 3MT adaptor
- 2MT & 3MT adaptors
- M12 x 1.75mm Drawbar
Specifications:
ORDER CODE: M579
MODEL: HM-54GV
Digital Readout: 3-Axis Digital Readout
Type: Vertical & Horizontal
Table Size (mm): 1000 x 240
Column Type: ~
Spindle Taper - Vertical: NT30
Spindle Taper - Horizontal: NT30
Longitudinal Travel (X-Axis) (mm): 600*
Cross Travel (Y-Axis) (mm): 200*
Vertical Travel (Z-Axis) (mm): 340
Type of Slides: Dovetail
Ram Travel (mm): 450
Spindle to Table (mm): 375
Spindle to Base: ~
Spindle Travel / Diameter (mm): 120 / 90
Throat Depth (max.) (mm): 640
Tilting Head (Left ~ Right): ??45??
Tilting Head (Forward ~ Back): Fixed
Drilling Capacity (mm): 40
End Milling Capacity (mm): 25
Face Milling Capacity (mm): 80
Power Feed - Quill (mm/rev): Manual
Power Feed - Longitudinal (X-Axis) (mm/min): 20 - 2000
Power Feed - Cross (Y-Axis) (mm/min): Optional *
Power Feed - Vertical (Z-Axis) (mm/min): Optional *
Table T-Slot Size (inch / mm): 14
Work Table Load Capacity (kg): 160
Spindle Speeds Vertical (No./ rpm): Variable (100 - 2000)
Spindle Speeds Horizontal (No./ rpm): 9 (60 - 1350)
Spindle Speeds - Universal Head: ~
Motor Power - Vertical Spindle (kW / hp): 2.2 / 3
Motor Power - Horizontal Spindle (kW / hp): 1.5 / 2
Motor Power - Universal Head: ~
Voltage / Amperage (V / amp): 240 / 10
Nett Weight (kg): 900
To Purchase Online Please Visit The Machineryhouse Website & Search For 'M579'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
