HAFCO METALMASTER BM-30A
Finance Estimate
From $62.75*
per week
From 9.27% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.27% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.27% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Finance Estimate
From $62.75*
per week
From 9.27% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.27% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.27% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Contact Seller
Features
| Title | HAFCO METALMASTER BM-30A |
| Type | Engineering - Fabrication |
| Sub Type | Milling Machines |
| Make | HAFCO METALMASTER |
| Model | BM-30A |
| Sale Price | $12,700 GST Exclusive |
| Listing Type | New |
| Stock Number | 7063 |
| RefCode | TA1269502 |
Description
BM-30A Industrial Turret Milling Machine Table Travel: (X) - 760mm (Y) - 360mm (Z) - 430mm Includes
HAFCO-METALMASTER BM-30A Industrial Turret Milling Machine Table Travel: (X) - 760mm (Y) - 360mm (Z) - 430mm Includes Digital Readout System, Vice & Clamp Kit
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: M603D
The BM-30A Industrial turret milling machine is manufactured in Taiwan to a strict precision engineering ultra-high tolerance & superior excellence to cope with many jobs set out by the professional machinist and importantly to deliver many years of valuable & reliable service.
This small but robust milling machine package is complete with a few of the most desirable features like, turcite B coated X & Y slide-ways that reduces friction to provide smooth table movement even when loaded up with a heavy job, hardened & ground work table & slide-ways, X-axis auto power-feed with adjustable feed stops, 3-axis digital readout counter plus X & Y scales fitted and also includes a machine vice & clamp kit set to get you started.
Another reliable feature in this range of precision milling machines is the manufacturing process of the main body & supports, it is made up form the highest quality Meehanite?? cast iron. The key to the undisputed success of Meehanite?? metals is the rigid application of its patented manufacturing process to provide ultimate strength & durability performance.
To conclude this BM-30A turret milling machine may be small in structure but holds its own when put to the test to perform its duties to produce quality precise parts.
Features:
3-Axis digital readout counter fitted with 2-Axis X & Y scales only
3HP 240V motor 8-speeds V-belt drive system
NT30 Spindle taper with a chrome & ground quill
Hardened & ground work table & slide-ways
Turcite B coated X & Y-Axis slide-ways reduces friction for smooth operation
All slides utilise dovetail construction for maximum rigidity
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
Align CE-300S X-Axis power-feed with adjustable micro switch feed stops
Metric dial graduations @ 0.02mm for X Y & Z-Axis
Automatic quill feed 0.015 0.04 0.08mm/rev
Automatic cut off depth stop on quill
Oil lubrication pump and reservoir
Slideway covers Y & Z-Axis
Mill head tilts to ??45?? forward and back
Mill head tilts to ??90?? left and right
Manual quick action quill lever
Mechanical spindle brake
Low voltage LED work light
Tool box and manual
Includes:
- 3-Axis digital readout counter fitted with 2-Axis X & Y scales only
- One-shot oil lubrication pump and reservoir
- Drawbar M12 thread
- Coolant system
- Slideway covers
- X-Axis power-feed
- LED Work light
- Machine vice (150mm)
- Clamp kit
- Safety cutter guard
- Swarf tray
Specifications:
ORDER CODE: M603D
MODEL: BM-30A
Digital Readout: 3-Axis Counter, X, Y Scales
Type: Vertical
Table Size (mm): 1270 x 254
Column Type: ~
Spindle Taper - Vertical: NT30
Spindle Taper - Horizontal: ~
Longitudinal Travel (X-Axis) (mm): 760
Cross Travel (Y-Axis) (mm): 360
Vertical Travel (Z-Axis) (mm): 430
Type of Slides: Dovetail
Ram Travel (mm): 520
Spindle to Table (mm): 505
Spindle to Base: ~
Spindle Travel / Diameter (mm): 127 / 86
Throat Depth (max.) (mm): 740
Tilting Head (Left ~ Right): ??90??
Tilting Head (Forward ~ Back): ??45??
Drilling Capacity (mm): ~
End Milling Capacity (mm): ~
Face Milling Capacity (mm): ~
Power Feed - Quill (mm/rev): 0.015 / 0.04 / 0.08
Power Feed - Longitudinal (X-Axis) (mm/min): 20 - 2000
Power Feed - Cross (Y-Axis) (mm/min): Optional
Power Feed - Vertical (Z-Axis) (mm/min): Optional
Table T-Slot Size (inch / mm): 5/8
Work Table Load Capacity (kg): 250
Spindle Speeds Vertical (No./ rpm): 8 (80 - 2720)
Spindle Speeds Horizontal (No./ rpm): ~
Spindle Speeds - Universal Head: ~
Motor Power - Vertical Spindle (kW / hp): 2.2 / 3
Motor Power - Horizontal Spindle (kW / hp): ~
Motor Power - Universal Head: ~
Voltage / Amperage (V / amp): 240 / 20
Nett Weight (kg): 1100
To Purchase Online Please Visit The Machineryhouse Website & Search For 'M603D'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
HAFCO-METALMASTER BM-30A Industrial Turret Milling Machine Table Travel: (X) - 760mm (Y) - 360mm (Z) - 430mm Includes Digital Readout System, Vice & Clamp Kit
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: M603D
The BM-30A Industrial turret milling machine is manufactured in Taiwan to a strict precision engineering ultra-high tolerance & superior excellence to cope with many jobs set out by the professional machinist and importantly to deliver many years of valuable & reliable service.
This small but robust milling machine package is complete with a few of the most desirable features like, turcite B coated X & Y slide-ways that reduces friction to provide smooth table movement even when loaded up with a heavy job, hardened & ground work table & slide-ways, X-axis auto power-feed with adjustable feed stops, 3-axis digital readout counter plus X & Y scales fitted and also includes a machine vice & clamp kit set to get you started.
Another reliable feature in this range of precision milling machines is the manufacturing process of the main body & supports, it is made up form the highest quality Meehanite?? cast iron. The key to the undisputed success of Meehanite?? metals is the rigid application of its patented manufacturing process to provide ultimate strength & durability performance.
To conclude this BM-30A turret milling machine may be small in structure but holds its own when put to the test to perform its duties to produce quality precise parts.
Features:
3-Axis digital readout counter fitted with 2-Axis X & Y scales only
3HP 240V motor 8-speeds V-belt drive system
NT30 Spindle taper with a chrome & ground quill
Hardened & ground work table & slide-ways
Turcite B coated X & Y-Axis slide-ways reduces friction for smooth operation
All slides utilise dovetail construction for maximum rigidity
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing repositioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
Align CE-300S X-Axis power-feed with adjustable micro switch feed stops
Metric dial graduations @ 0.02mm for X Y & Z-Axis
Automatic quill feed 0.015 0.04 0.08mm/rev
Automatic cut off depth stop on quill
Oil lubrication pump and reservoir
Slideway covers Y & Z-Axis
Mill head tilts to ??45?? forward and back
Mill head tilts to ??90?? left and right
Manual quick action quill lever
Mechanical spindle brake
Low voltage LED work light
Tool box and manual
Includes:
- 3-Axis digital readout counter fitted with 2-Axis X & Y scales only
- One-shot oil lubrication pump and reservoir
- Drawbar M12 thread
- Coolant system
- Slideway covers
- X-Axis power-feed
- LED Work light
- Machine vice (150mm)
- Clamp kit
- Safety cutter guard
- Swarf tray
Specifications:
ORDER CODE: M603D
MODEL: BM-30A
Digital Readout: 3-Axis Counter, X, Y Scales
Type: Vertical
Table Size (mm): 1270 x 254
Column Type: ~
Spindle Taper - Vertical: NT30
Spindle Taper - Horizontal: ~
Longitudinal Travel (X-Axis) (mm): 760
Cross Travel (Y-Axis) (mm): 360
Vertical Travel (Z-Axis) (mm): 430
Type of Slides: Dovetail
Ram Travel (mm): 520
Spindle to Table (mm): 505
Spindle to Base: ~
Spindle Travel / Diameter (mm): 127 / 86
Throat Depth (max.) (mm): 740
Tilting Head (Left ~ Right): ??90??
Tilting Head (Forward ~ Back): ??45??
Drilling Capacity (mm): ~
End Milling Capacity (mm): ~
Face Milling Capacity (mm): ~
Power Feed - Quill (mm/rev): 0.015 / 0.04 / 0.08
Power Feed - Longitudinal (X-Axis) (mm/min): 20 - 2000
Power Feed - Cross (Y-Axis) (mm/min): Optional
Power Feed - Vertical (Z-Axis) (mm/min): Optional
Table T-Slot Size (inch / mm): 5/8
Work Table Load Capacity (kg): 250
Spindle Speeds Vertical (No./ rpm): 8 (80 - 2720)
Spindle Speeds Horizontal (No./ rpm): ~
Spindle Speeds - Universal Head: ~
Motor Power - Vertical Spindle (kW / hp): 2.2 / 3
Motor Power - Horizontal Spindle (kW / hp): ~
Motor Power - Universal Head: ~
Voltage / Amperage (V / amp): 240 / 20
Nett Weight (kg): 1100
To Purchase Online Please Visit The Machineryhouse Website & Search For 'M603D'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
